Welcome to the Traxxas RC Hobby Store where you can find thousands of choices in Traxxas cars and trucks such as the Summit, the Slash, the Stampede, Traxxas Quadcopters and Helicopters, even Racing Boats plus thousands of choices in Traxxas accessories.
∇ Use Search Below to find what you need. We have more than 17,000 items in our catalog.

Traxxas 5451R Revo/Maxx Steel CV Driveshafts (Assembled with Boots)

Traxxas 5451R Revo Maxx Steel CV Driveshafts (Assembled with Boots)
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that a T-Maxx or Revo can dish out. The inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. These are simply the most advanced steel CV driveshafts available. T-Maxx (models #4902, 4908, 4909), Revo 3.3 (models #5308, 5309), E-Revo (model #5605) and E-Maxx (model #3905) only. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.
$69.95 Show Detail

Traxxas 1/10 E-Revo Brushless *FRONT & REAR DRIVE SHAFTS, AXLES, U-J

Traxxas 1 10 E-Revo Brushless *FRONT & REAR DRIVE SHAFTS - AXLES - U-JOINTS & YOKE
Traxxas 1/10 E-Revo Brushless (Model 5608 & 5608L)Front & Rear Axle DriveshaftsMSRP:48.00Includes:Driveshaft Assembly (Part # 5451X x 4)This product is compatible with the following Model(s): Traxxas 1/10 E-Revo Brushless (Model 5608 & 5608L), E-Revo Brushless
$50.00 Show Detail

Traxxas 5650R Steel Constant-Velocity Center Driveshafts

Traxxas 5650R Steel Constant-Velocity Center Driveshafts
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out. The inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. These are simply the most advanced steel CV driveshafts available. Complete kit includes front and rear driveshafts, ready to install. Fits E-Revo, Summit, and E-Revo Brushless Edition. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.
$39.95 Show Detail

Hot Racing RVO288RC Metal CV Splined Drive Shaft Revo/Summit/T-Max

Hot Racing RVO288RC Metal CV Splined Drive Shaft Revo Summit T-Max
Hot Racing heavy duty splined star drive CVD axle kit for the front or rear of the NEW Traxxas 1/10th scale E-Revo, E-Maxx, Revo 3.3, T-Maxx 3.3, and Summit. These shafts are compatible with vehicles that use the Traxxas 5451X axle shafts. Please confirm that the vehicle uses these shafts before ordering. FEATURES: - CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle- CNC machined aluminum slider tube- Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement- Rubber dust cover boots- Replaces factory front or rear driveshaft axlesYOU WILL RECEIVE: - Two (2) splined axle assembliesREQUIREMENTS: - Installation to the drive assembly- Need to reuse the stock Drive pin and set screw- Recommended to maintain CV joint and shaft spline with grease- Recommended to medium thread lock on screws threading into metalSPECIFICATIONS: - Collapsed length, overall: - Extended length, overall resulting in zero shaft engagement: - Collapsed length, wheel pin to outdrive pin: - Extended length, wheel pin to outdrive pin resulting in zero shaft engagement: COMMENTS:
$68.88 Show Detail

Atomik RC Alloy Front Axle Carriers, Blue fits the Traxxas 1/16 Slash 4x

Atomik RC Alloy Front Axle Carriers - Blue fits the Traxxas 1 16 Slash 4x4 and Other Traxxas Models - Replaces Traxxas Part 7034
Give your Traxxas 1/16 Slash 4x4 the gift of alloy greatness with this Alloy Front Axle Carriers, Blue. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/16 Slash 4x4, available now in blue, red, and grey/gunmetal.Replaces Traxxas Part No. 7034. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.Fits the Following Traxxas Models: Traxxas 1/16 Slash 4x4, Traxxas 1/16 E-Revo, Traxxas 1/16 Boss 302 Ford Mustang VXL, Traxxas 1/16 Rally VXL, Traxxas 1/16 Monster Jam Series, Traxxas 1/16 Ford Fiesta.
$15.98 Show Detail

Brushless E-REVO KNUCKLES 5334R (axle carriers) 1/10 Traxxas #56

Brushless E-REVO KNUCKLES 5334R (axle carriers) 1 10 Traxxas #5608
Parts are removed from brand new RTR models - Have never been driven or used. Parts will be come enclosed in our OEM packaging.
$48.00 Show Detail

Raidenracing CVD Universal Drive Shaft Axles 2pcs for 1/10 Traxxas E-Rev

Raidenracing CVD Universal Drive Shaft Axles 2pcs for 1 10 Traxxas E-Revo Summit E-Maxx T-Maxx Revo 3.3
CVD Universal Drive Shaft Axles 2pcs for 1/10 Traxxas E-Revo Summit E-Maxx T-Maxx Revo 3.3
$39.99 Show Detail

RPM 73165 Axle Carriers Blue 1/16 Traxxas Blue

RPM 73165 Axle Carriers Blue 1 16 Traxxas Blue
RPM Axle Carriers, Blue: 1/16 EVR/SLH, RPM73165
$11.37 Show Detail

Traxxas 1/10 E-Revo, Revo 3.3, Summit, E-Maxx Brushless Axle Carrier Whe

Traxxas 1 10 E-Revo - Revo 3.3 - Summit - E-Maxx Brushless Axle Carrier Wheel Hub Bearing Kit Set (8 Bearings)
When you need a durable yet affordable bearing that can stand up to some punishment look no further than our Elements Series bearing kits. Featuring chrome plated steel construction with durable rubber seals on both sides they can stand up to the best that mother nature has to offer. THIS KIT FITS THE FOLLOWING MODELS: Traxxas 3.3 Revo (#5309)  Traxxas E-Revo Brushless (#5608)  Traxxas E-Maxx Brushless (#39087-1) Traxxas 1/10 Summit (#5607) THIS KIT INCLUDES THE FOLLOWING BEARINGS: 6x13x5mm (4 Pieces)* 12x18x4mm (4 Pieces) *Note: Some older E-Maxx models used a 6x12x4mm bearing instead of the 6x13x5mm.
$9.95 Show Detail

Integy RC Model Hop-ups T3556ORANGE Billet Machined T2 Knuckle Axle Carr

Integy RC Model Hop-ups T3556ORANGE Billet Machined T2 Knuckle Axle Carrier (2) for 1 16 Traxxas E-Revo & Slash VXL
OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T3556ORANGE Barcode: 91789016100
$20.99 Show Detail
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 ·