Welcome to the Traxxas RC Hobby Store where you can find thousands of choices in Traxxas cars and trucks such as the Summit, the Slash, the Stampede, Traxxas Quadcopters and Helicopters, even Racing Boats plus thousands of choices in Traxxas accessories.
∇ Use Search Below to find what you need. We have more than 17,000 items in our catalog.

Traxxas Stampede 4x4 XL-5 * BULKHEADS, DIFFERENTIAL HOUSING CASES &

Traxxas Stampede 4x4 XL-5 * BULKHEADS - DIFFERENTIAL HOUSING CASES & SKID PLATES
Traxxas 1/10 Stampede 4x4 XL-5 (Model 67054)Front & Rear Bulkheads & Differential HousingMSRP:20.00Includes:Front Bulkhead (Part # 6830X)Differential Housing (Part # 6881)Rear Bulkhead (Part # 6829)Differential Housing (Part # 6880)This product is compatible with the following Model(s): Traxxas 1/10 Stampede 4x4 XL-5 (Model 67054), Stampede 4x4 XL-5
$20.00 Show Detail

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampe

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash - Rustler - Stampede - and Bandit - Blue
After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper/wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper/wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper/wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper/wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!
$9.72 Show Detail

Traxxas 1/10 Stampede 4x4 XL-5 * TQ 2.4GHz 3-Channel RECEIVER * LINK rad

Traxxas 1 10 Stampede 4x4 XL-5 * TQ 2.4GHz 3-Channel RECEIVER * LINK radio box
r/c parts
$29.95 Show Detail

Slipper Clutch Eliminator for Traxxas 1/10 Stampede / Slash VXL / XL5 2W

Slipper Clutch Eliminator for Traxxas 1 10 Stampede Slash VXL XL5 2WD
eleminate the slipper assembly on the Traxxas 1/10 Stampede / Slash VXL / XL5 2WD Transmissions. Simple to install, use your existing cross pin, bearing, spring, nut and spur gear to complete. 1/3 the rotational weight as the stock slipper assembly. Instant response for serious racers. Built for extreme brushless power. Precision CNC machined 6061 aluminum. Your are purchasing just the slipper eliminator, other items in the pictures are for show.
$20.93 Show Detail

Traxxas 1/10 Stampede ROLLER ROLLING CHASSIS VXL XL-5

Traxxas 1 10 Stampede ROLLER ROLLING CHASSIS VXL XL-5
$179.99 Show Detail

Hot Racing STE886 Hardened Steel Spur Gear (86t 48p)(Silver) - Traxxas

Hot Racing STE886 Hardened Steel Spur Gear (86t 48p)(Silver) - Traxxas
Hot Racing light weight hardened steel 86 tooth, 48 pitch spur gear for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD Stampede vehiclesFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Black oxide coated gear for durability and corrosion resistance- Silver anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 86 tooth 48 pitch spur gear- Three (3) mounting screws- Three (3) silver anodized countersunk washers- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)SPECIFICATIONS: - Number of Teeth: 86- Gear Pitch: 48 pitch- Mounting Holes: 3- Tooth Face width: ~5mm COMMENTS: - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017
$24.89 Show Detail

Traxxas Stampede 1/10 Scale 2WD Monster Truck with TQ 2.4GHz Radio, Hawa

Traxxas Stampede 1 10 Scale 2WD Monster Truck with TQ 2.4GHz Radio - Hawaiian
The Stampede has a bold look, innovative features, and more power than ever! combine the increased horsepower with the tall 4" ground clearance, ultra-tough suspension, ease of use, and waterproof electronics and Stampede will quickly become your go-to vehicle for monster truck fun. No other truck offers Stampede's unique style, capability, and durability. The Titan 12-turn 550 modified motor and Magnum 272 transmission propel the Stampede to speeds over 30mph. The Titan's integrated cooling fan pulls air through the motor for faster speeds, longer runtime, and extended motor life. The TQ 2.4GHz radio system's ergonomic design is comfortable for all-day driving and its internal antenna is impervious to damage. The Stampede includes a convenient AC wall outlet charger and a Traxxas ID power Cell battery pack with the Traxxas ID High-Current connector. The Stampede is Ready-To-Race in all conditions. The XL-5 ESC and receiver are sealed, giving you the freedom to tackle the elements. The waterproof XL-5 electronic speed control harnesses the power of the Titan 12T motor and makes the Stampede as fast as it looks. Ez-set one-button setup easily adjusts or changes profiles. Traxxas' exclusive patented training mode profile cuts power output in half and leaves the brakes at full strength for young or first time drivers who want to learn the ropes before unleashing full power. World-class engineering, Traxxas’ support, and unparalleled parts availability are some of the reasons why Stampede is a perennial favorite.
$206.64 Show Detail

RPM Automobile 70665 Wide Front a-Arms Traxxas E-Rustler and Stampede 2W

RPM Automobile 70665 Wide Front a-Arms Traxxas E-Rustler and Stampede 2WD-Blue
Are you looking to add some serious stability to your electric Rustler or Stampede 2WD? look no further. RPM has a new set of wide front A-Arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total Width for some serious stability-adding performance. Our wide front A-Arms extend the front Width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to ALIGN the front and rear tires and you’re good to go. no expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-Arms with RPM wide A-Arms, swap the turnbuckles and camber links for longer versions (not included see “Tech notes” below) and bolt on a new set of rear wheels. it couldn’t be easier. You already know RPM A-Arms are the toughest molded A-Arms in the R/C industry (Gram for Gram, stronger than aluminum as well). each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited Lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong. Tech notes: RPM wide A-Arms for the Traxxas Rustler & Stampede 2WD fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac & Skully: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).
$11.26 Show Detail

Traxxas 24054-1 Bandit 1/10 Scale 2WD Off-Road Buggy with TQ 2.4GHz Radi

Traxxas 24054-1 Bandit 1 10 Scale 2WD Off-Road Buggy with TQ 2.4GHz Radio - Blue
The Traxxas Bandit redefines traditional buggy performance by creating a whole new class of Extreme Sports Buggy. Bandit offers the highest levels of speed, action, and fun that will easily make it one of your favorites for all kinds of R/C driving excitement. The lightweight Bandit chassis is loaded with an aggressive Titan 12-Turn modified motor and a high-current XL-5 Electronic Speed Control that deliver lightning-fast acceleration and incredible 35+mph performance. Pull the trigger and Bandit rips massive rooster tails, soars over giant jumps, and lays down the power for pure performance and excitement at every turn. With features like fully waterproof electronics, 2.4Ghz radio system, HD slipper clutch, and HD metal gears this car is ready for extreme fun and harsh conditions.
$179.95 Show Detail

Bobbyrc Traxxas 2423 Pinion Gear 23T 48P(3pcs) Slash 2WD Rustler Stamped

Bobbyrc Traxxas 2423 Pinion Gear 23T 48P(3pcs) Slash 2WD Rustler Stampede Bandit VXL XL5
SPECS--Outer Diameter: 14mm (9/16")//// Inner Diameter:---11mm (7/16") Shaft size 3.2mm///// Fits: Traxxas Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL-5 / 1/10 Slash 2WD / 1/16 E-Revo VXL / 1/16 Slash VXL / 1/16 Summit VXL / 1/16 Rally VXL / 1/16 Ford Mustang Boss / 1/16 Kyle Busch Race Replica and Many More
$13.89 Show Detail
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 ·