Welcome to the Traxxas RC Hobby Store where you can find thousands of choices in Traxxas cars and trucks such as the Summit, the Slash, the Stampede, Traxxas Quadcopters and Helicopters, even Racing Boats plus thousands of choices in Traxxas accessories.
∇ Use Search Below to find what you need. We have more than 17,000 items in our catalog.

Traxxas 2wd Rustler, Stampede, Slash, Skully, Cranium, Monster Jam Serie

Traxxas 2wd Rustler - Stampede - Slash - Skully - Cranium - Monster Jam Series Complete Bearing Kit Set - VXL & XL5 (19 Bearings) DSM Off-Road
When you need a durable yet affordable bearing that can stand up to some punishment look no further than our Elements Series bearing kits. Featuring chrome plated steel construction with durable rubber seals on both sides they can stand up to the best that mother nature has to offer. Note: Some older models used 5x10x4mm bearings at the wheels. If they have been upgraded with aftermarket or newer Traxxas carriers then this bearing kit will work for those older models. THIS KIT INCLUDES THE FOLLOWING: 5x11x4mm (15 Pieces)  5x8x2.5mm (4 Pieces)
$14.95 Show Detail

bobbyrc Traxxas 2426 Pinion Gear 26T 48P (2pcs) Slash 2WD Rustler Stampe

bobbyrc Traxxas 2426 Pinion Gear 26T 48P (2pcs) Slash 2WD Rustler Stampede Bandit VXL XL5
Fits///////Traxxas Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL-5 / 1/10 Slash 2WD / 1/16 E-Revo VXL / 1/16 Slash VXL / 1/16 Summit VXL / 1/16 Rally VXL / 1/16 Ford Mustang Boss / 1/16 Kyle Busch Race Replica and Many More
$9.89 Show Detail

Traxxas 1/10 Stampede 2WD VXL 86T Spur Gear & Slipper Clutch with Pi

Traxxas 1 10 Stampede 2WD VXL 86T Spur Gear & Slipper Clutch with Pinion Gears
ALL NEW PARTS - Removed from a never run Traxxas vehicle. This Product Includes: Spur Gear and Slipper Clutch Assembly Spur Gear Dust Cover with Rubber Plug (Part # 3792) 86 Tooth Spur Gear - 48 Pitch (Part # 4686) One (1) 5x11x4mm Ball Bearing (Part # 5116) 19 Tooth Pinion Gear - 48 Pitch (Part # 2419) 25 Tooth Pinion Gear - 48 Pitch (Part # 4725) Slipper Clutch Kit with Steel Disc, Friction Pads, Spring, Pin and Nut (Part # 5552X) Aluminum Alloy Pressure Plate and Hub (Part # 5556) Three (3) Cap Screws (Part # 2554) Two (2) Button Head Machine Screws (Part # 2575 Partial) This part is fully compatible with all Traxxas Monster Jam 1/10 scale trucks. This includes Grave Digger, Son-Uva Digger, Captains Curse, Monster Mutt, Maximum Destruction and the Advance Auto Parts Grinder. This part is also compatible with the Traxxas Stampede 2wd XL-5 and VXL. It may be compatible with other models as well.
$15.99 Show Detail

Aluminum Shock W/ 4mm Shafts Fit Traxxas Stampede Slash 4x4 / VXL XL-5 B

Aluminum Shock W 4mm Shafts Fit Traxxas Stampede Slash 4x4 VXL XL-5 Blue G-Maxx
Aluminum Shock W/ 4mm Shafts Fit Traxxas Stampede Slash 4x4 / VXL XL-5 Blu G-Maxx
$58.28 Show Detail

MIP 08123 C-CVD Kit Stampede and Rustler, VXL/XL-5

MIP 08123 C-CVD Kit Stampede and Rustler - VXL XL-5
Key Features15% larger shaft diameter for today’s high demand power systems.Hardened High Strength Alloy Axles, black oxide coated.Thread-on RED Capture Ring to ensure proper placement of the cross pin.Fits for Traxxas Electric Rustler, Stampede (2)
$31.88 Show Detail

Traxxas Stampede 1/10 2WD Monster Truck with TQ 2.4GHz Radio, Red, 1:10

Traxxas Stampede 1 10 2WD Monster Truck with TQ 2.4GHz Radio - Red - 1:10 Scale
The Stampede has a bold look, innovative features, and more power than ever! Combine the increased horsepower with the tall 4" ground clearance, ultra-tough suspension, ease of use, and waterproof electronics and Stampede will quickly become your go-to vehicle for monster truck fun. No other truck offers Stampede's unique style, capability, and durability. The Titan 12-turn 550 modified motor and Magnum 272 transmission propel the Stampede to speeds over 30mph. The Titan's integrated cooling fan pulls air through the motor for faster speeds, longer runtime, and extended motor life. The TQ 2.4GHz radio system's ergonomic design is comfortable for all-day driving and its internal antenna is impervious to damage. The Stampede is Ready-To-Race in all conditions. The XL-5 ESC and receiver are sealed, giving you the freedom to tackle the elements. The waterproof XL-5 electronic speed control harnesses the power of the Titan 12T motor and makes the Stampede as fast as it looks. EZ-Set one-button setup easily adjusts or changes profiles. Traxxas' exclusive patented Training Mode profile cuts power output in half and leaves the brakes at full strength for young or first time drivers who want to learn the ropes before unleashing full power. World-class engineering, Traxxas’ support, and unparalleled parts availability are some of the reasons why Stampede is a perennial favorite. Battery and charger sold separately.
$180.00 Show Detail

Traxxas 3625 XL-5 Mounting Plate

Traxxas 3625 XL-5 Mounting Plate
This is the Mounting Plate, XL5 from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.
$5.25 Show Detail

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampe

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash - Rustler - Stampede - and Bandit - Black
After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!.
$10.95 Show Detail

Traxxas Stampede 1/10 Scale Monster Truck with TQ 2.4GHz Radio System, H

Traxxas Stampede 1 10 Scale Monster Truck with TQ 2.4GHz Radio System - Hawaiian
This is the 1/10 scale electric powered, 2.4GHz radio controlled, Ready To Run Traxxas Stampede off-road Monster Truck with the XL-5 Electronic Speed Control. For ages 8 and above.
$266.15 Show Detail

RPM Automobile 70665 Wide Front a-Arms Traxxas E-Rustler and Stampede 2W

RPM Automobile 70665 Wide Front a-Arms Traxxas E-Rustler and Stampede 2WD-Blue
Are you looking to add some serious stability to your electric Rustler or Stampede 2WD? look no further. RPM has a new set of wide front A-Arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total Width for some serious stability-adding performance. Our wide front A-Arms extend the front Width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to ALIGN the front and rear tires and you’re good to go. no expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-Arms with RPM wide A-Arms, swap the turnbuckles and camber links for longer versions (not included see “Tech notes” below) and bolt on a new set of rear wheels. it couldn’t be easier. You already know RPM A-Arms are the toughest molded A-Arms in the R/C industry (Gram for Gram, stronger than aluminum as well). each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited Lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong. Tech notes: RPM wide A-Arms for the Traxxas Rustler & Stampede 2WD fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac & Skully: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).
$11.24 Show Detail
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 ·