Welcome to the Traxxas RC Hobby Store where you can find thousands of choices in Traxxas cars and trucks such as the Summit, the Slash, the Stampede, Traxxas Quadcopters and Helicopters, even Racing Boats plus thousands of choices in Traxxas accessories.
∇ Use Search Below to find what you need. We have more than 17,000 items in our catalog.

RPM Wide Front a-Arms for The Traxxas E-Rustler and Stampede 2WD Replace

RPM Wide Front a-Arms for The Traxxas E-Rustler and Stampede 2WD Replacement Parts - Red
You already know RPM A-Arms are the toughest molded A-Arms in the R/C industry (Gram for Gram, stronger than aluminum as well)! each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited Lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong! Tech notes: RPM wide A-Arms for the Traxxas Rustler and Stampede 2WD fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac and Skully: 1 – RPM screw kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) and 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) and 1 pair of front wheels (used to replace rear wheels).
$11.24 Show Detail

Hot Racing CSG32X14 Short 32P Steel Pinion Gear 14T

Hot Racing CSG32X14 Short 32P Steel Pinion Gear 14T
Hot Racing brush-less black steel 32 pitch 14 tooth pinion gear. FEATURES: standard 4140 steel and heat treat heavy duty 4mm set screw for brush-less powerYOU WILL RECEIVE: one 32 pitch 14 tooth pinion gear with 4mm set screwSPECIFICATIONS: inner diameter: 1/8" (3.175mm)length 10.50 MMTooth width 5 mm
$7.89 Show Detail

Hot Racing STE886 Hardened Steel Spur Gear (86t 48p)(Silver) - Traxxas

Hot Racing STE886 Hardened Steel Spur Gear (86t 48p)(Silver) - Traxxas
Hot Racing light weight hardened steel 86 tooth, 48 pitch spur gear for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD Stampede vehiclesFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Black oxide coated gear for durability and corrosion resistance- Silver anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 86 tooth 48 pitch spur gear- Three (3) mounting screws- Three (3) silver anodized countersunk washers- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)SPECIFICATIONS: - Number of Teeth: 86- Gear Pitch: 48 pitch- Mounting Holes: 3- Tooth Face width: ~5mm COMMENTS: - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017
$49.76 Show Detail

Hot Racing NSG828 28t Steel 48p Pinion Gear 5mm

Hot Racing NSG828 28t Steel 48p Pinion Gear 5mm
Optional 28 Tooth 48 Pitch Steel Pinion Gear for 5mm shaftFEATURES: CNC Steel Gear is then Nitride Coated for increased wear resistance, improved fatigue life, and enhanced corrosion Resistance.Black Steel base construction with 4mm set screwLonger Base surface for maximum contactYOU WILL RECEIVE: One pinion gear One set screw 4x4mmOne 5mm to 1/8 conversion Sleeve REQUIREMENTS: 2mm hex wrench to install the set screwSPECIFICATIONS: length: 14mm48 Pitch 28 tooth description revised by: WP June 10, 2014
$9.89 Show Detail

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash, Rustler, Stampe

RPM Rear Bumper or Wheelie Bar Mount Electric 2WD Slash - Rustler - Stampede - and Bandit - Blue
After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper/wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper/wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that's two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper/wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper/wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up!
$8.86 Show Detail

Hot Racing CSG1814 14t 48p Hardened Steel Pinion Gear 1/8 Bore

Hot Racing CSG1814 14t 48p Hardened Steel Pinion Gear 1 8 Bore
Black steel 48 Pitch 14 Tooth Pinion Gear. FEATURES: Standard 4140 steel and heat treatedheavy duty 3mm set screw for brushless powerYOU WILL RECEIVE: One 48 Pitch 14 Tooth Pinion Gear with 3mm set screwSPECIFICATIONS: Inner diameter: 1/8" (3mm)Length 9mmdescription revised by: WP April 1, 2014
$6.29 Show Detail

Hot Racing SLF63RS286 Progressive Rate Race Spec Spring Set

Hot Racing SLF63RS286 Progressive Rate Race Spec Spring Set
Optional rear progressive rate rs spring set for use on the Traxxas 4x4 Slash or Stampede 4x4FEATURES: steel constructionYOU WILL RECEIVE: two rear red springs soft (15t)two rear chrome springs med (14t)two rear blue springs hard (13t)REQUIREMENTS: installation on the vehicleSPECIFICATIONS: length: 63mm (2.5")outer diameter: 18mm (0.71")inner diameter: 15.5mm (0.61")wire diameter: 1.3mm (0.05")COMMENTS: for the front progressive spring set slf48rs286 description revised by: WP June 23, 2014
$8.88 Show Detail

Hot Racing 20t 48p Hardened Steel Pinion Gear 1/8 Bore CSG1820

Hot Racing 20t 48p Hardened Steel Pinion Gear 1 8 Bore CSG1820
Hot Racing brushless Black steel 48 Pitch 20 Tooth Pinion Gear. FEATURES: Standard 4140 steel and heat treat heavy duty 4mm set screw for brushless powerYOU WILL RECEIVE: One 48 Pitch 20 Tooth Pinion Gear with 4mm set screwSPECIFICATIONS: Inner diameter: 1/8" Length 12mmdescription revised by: WP February 12, 2014
$6.29 Show Detail

Hot Racing Aluminum 90mm HD Big Bore Shocks (2)

Hot Racing Aluminum 90mm HD Big Bore Shocks (2)
Hot Racing 90mm big bore threaded body aluminum shocks for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: many 1/10th scale truck and buggy front shocks; the Traxxas Bandit front, Nitro Rustler/Slash/Sport/Stampede front, Rustler front, Slash 2WD front, Slash 4x4 front, Stampede 2WD front, Stampede 4x4 front; and and other similar vehiclesFEATURES: - CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers- "Big Bore" threaded shock bodies- CNC machined 11mm Delrin pistons- 3.5mm stainless steel shock shafts- Silver and blue anodized aluminum components- Vented shock caps with bladder seals for consistent rebound dampening- Threaded shock collars with o-rings to prevent unwanted movement- Composite plastic lower shock ends with aluminum balls- Fully assembled, just add shock oil and bleedYOU WILL RECEIVE: - Two (2) assembled shocks- Two (2) M3x20mm flat head cap screws- Two (2) M3x18mm button head cap screws- Two (2) 3mm countersunk washers- Two (2) 5.9 hollow balls- Four (4) 1.5mm thick spacers- Four (4) 3mm thick spacersREQUIREMENTS: - Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure- Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal- Snap ring pliers when rebuilding lower sealSPECIFICATIONS: - Replaces Traxxas Big Bore Long Shocks: TRA2660, 3760, 3760A, 4760- Extended length: 90mm- Overall length: 100mm- Spring: ~5.8lb/in, 1.54mm wire, 10 turn dual rate, 19.3mm ODCOMMENTS:
$30.32 Show Detail

Hot Racing Steel Pinion and Spur Gear 18t 60t 32p, Red: Traxxas

Hot Racing Steel Pinion and Spur Gear 18t 60t 32p - Red: Traxxas
Hot Racing light weight hardened steel 18T/60T 32 pitch pinion and spur gear set for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD StampedeFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Rugged 0.8 Module/32pitch teeth for total reliability on brushless power- Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts- Black oxide coated gear for durability and corrosion resistance- Red anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 18 tooth 32 pitch (0.8 Mod) pinion gear- One (1) 60 tooth 32 pitch (0.8 Mod) spur gear- Three (3) mounting screws- Three (3) red anodized countersunk washers- One (1) pinion adapter sleeve- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)SPECIFICATIONS: - Number of Teeth: 18T/60T- Gear Pitch: 32 pitch (0.8 module)- Mounting Holes: 3- Tooth Face width: ~5mmCOMMENTS: - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017
$26.62 Show Detail
1 · 2 · 3 · 4 · 5 · 6 · 7 · 8 · 9 · 10 ·